Signal Converters
Technical Detail:
- Model : SC 4W
- Type : 4 - wire
- Input : RTD Pt-100, 3 wiremT/C (J K R S type),DC Amp, AC Amp, ACV,
- DCV, Resistance, Speed, Frequency
- Input ranges : Pl. specify
- Output : 4-20 mA, 0-20 mA, 1-5 V, 0-10 V (Single - Quad Output )
- Output ripple : Less than ± 0.25% of span (i.e. 0.05 mA) R.M.S
- Load on Output : 750 Ù (for mAO/p) & > 100 K Ù (for Volt O/p)
- Isolation : Optical and Galvanic Isolation
- Linearity& Accuracy : Within ±0.25% of Span
- Power fuse : 0.25 Amp
- Line voltage Variation effect : 0.1% (within ±10% change)
- Response : Less than 1 sec.
- Anti-Humidity : Acryform conformal coating Treatment On PCB.
- Insulation Strength : Tested at 2.0 KV for all possible combination for one minute &
- At 500 VAC between electronics & earth.
- Drift : Within ±0.5% for 3 months
- Temp. Drift : ± 0.05% of Span per °C
- Power Supply : 110 / 230 VAC ±10%, 50 Hz / 24 VDC
- Operating ambient Temp. & Humidity : 0 to 55° C & 5 to 95% Rh
- Mounting : Din rail / Field (Imported ABS plastic)
- Terminal : Suitable for upto 2.5 sq. mm cable
- Adjustment : Zero & span are adjustable by two individual trim pots.
- Burn out protection : Upscale (T/c, RTD & R), down scale (others)
