2 - Wire Transmitters |

Technical Detail:
- Model: TRANS 2W
- Type: 2- Wire
- Input: RTD Pt-100, 3 wire T/C (J.K.R.S. type) DC Volt, DC current, Resistance (Pl. specify...)
- Input Range: Pl. Specify
- Output: (I) 4-20 rnA (ii) 1-5 VDC
- Load on Output: VS-(0.5 VR+12)/0.02 VS=Supply Voltage VR= Ripple in Supply Voltage
- Calibration: Zero & Span calibration by Two individual trimpots
- Isolation: Galvanic isolation of 2 KV
- I/P O/P Isolation: 1000 VDC or Peak AC
- Bum Out: Protection: Upscale (T/C, RTD & R) ,Down Scale (Others).
- Linearity & Accuracy: With in ± 0.25% of span
- Insulation Strength: Tested at 500 VAC between electronics & earth
- Anti Humidity Treatment: Acry form Conformal coating on PCB
- AC JC: Provided for TIC inputs
- Drift: Within ±0.5% for 3 months
- Temp. Drift: ± 0.05% of Span per °C
- Response time: Less than1 sec.
- Power Supply: 13 to 36 VDC (Reverse polarity protected)
- Ambient Temp. & Humidity: 0 °C to 60° C & Up to 95% Rh non Condensing
- Mounting: Din Rail / Field / Head (Imported ABS plastic)
- Terminals: Suitable for up to 2.5 sq.mm cable
- Insulation resistance: 200 M